| Raw Material: | Natural Rubber |
|---|---|
| Material: | Silicone Rubber |
| Appearance: | Liquid |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Liquid Silicone Slow Cure Silicone Rubber For Decorative Plaster/Gypsum Celling Molding
Liquid Silicone Slow Cure Silicone Rubber For Decorative Plaster/Gypsum Celling Molding:
Making molds for gypsum,GRC,concrete,resin products etc Artificial stone products molding,Wax casting Decoration building mold making (cornice,column, balustrade, ceiling, pedestals, fountains, mantels, wall ornament, planter,furniture decorative etc.) Unsaturated rein crafts,epoxy resin crafts, poly resin crafts,polyester resin. Lighting & candles crafts,stationery gifts,crafts industry Casting for Statue,Buddha,Christmas ornaments,sculptures,figures etc
Liquid Silicone Slow Cure Silicone Rubber For Decorative Plaster/Gypsum Celling Molding:
Tin cure silicone
| Typical general characteristics |
Inspection Method |
Model code | |||||||
|
Product data (catalyzed A+B) |
OTT-S8 series | ||||||||
| Hardness | Shore A | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 |
| Mix ratio | A:B | 100:3 | |||||||
| Color | / | white | |||||||
| Pot life | 25ºC(77F) | 20-40 mins | |||||||
| Curing time | 25ºC(77F) | 3-5 hours | |||||||
| Viscosity | mPa.s | 5000 | 8000 | 11000 | 11000 | 16000 | 21000 | 18000 | 12000 |
| Tear strength | KN/m | 10 | 16 | 24 | 23 | 26 | 26 | 24 | 22 |
| Tensile strength | MPa | 1.6 | 3.2 | 3.5 | 4.2 | 4.5 | 4.5 | 4.2 | 4.0 |
| Elongation | % | 500 | 600 | 580 | 500 | 500 | 450 | 350 | 280 |
| Shrinkage | % | 0.2 | |||||||
Platinum cure silicone
| Typical general characteristics |
Inspection Method |
Model code | ||||||||
|
Product data (catalyzed A+B) |
OTT-J8 series | |||||||||
| Hardness | Shore A | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 50 |
| Mix ratio | A:B | 1:1/10:1 | ||||||||
| Color | / | Translucent | ||||||||
| Pot life | 25ºC(77F) | 20-40 mins | ||||||||
| Curing time | 25ºC(77F) | 3-5 hours | ||||||||
| Viscosity | mPa.s | 1500 | 3000 | 4000 | 4500 | 5000 | 6000 | 7000 | 8000 | 12000 |
| Tear strength | KN/m | 12 | 15 | 18 | 24 | 22 | 21 | 22 | 18 | 12 |
| Tensile strength | MPa | 2.2 | 4.2 | 5.2 | 5.2 | 6.2 | 6.5 | 7.2 | 7.8 | 7.0 |
| Elongation | % | 500 | 450 | 450 | 500 | 500 | 450 | 450 | 400 | 400 |
| Shrinkage | % | 0.1 | ||||||||
Features:
1.Almost nil shrinkage
2.Good fluidity, operability and excellent operation
3.Good resistance to weather, temperature, aging, acid
4.Excellent tear strenght, comfortable duplcation times
5.High chemical resistance to aggressive components of some types of resins
6.Food grade silicone(environmental, odorless and nontoxic
7.High resistance to high temperature and aging(resist -60 to 200ºC)
Recommend Product
Liquid Silicone Slow Cure Silicone Rubber For Decorative Plaster/Gypsum Celling Molding:
1. Make sure the surface of the original is clean and free of loose material.
2. Weight 100 Part A base and 3 parts of Curing Agent in a clean container.
3. Stir Part A base silicone before use thoroughly , as filler separation may occur upon prolonged storage.
4. Mix Part A and Part B evenly until the catalyst completely dispersed in the base.
5. Pour the mixed Part A base silicone and curing agent as soon as possible onto the original
6. De-mold after 24 hours ,it is will improve the replicate times of silicone mold.
Note:It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 min under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.
Liquid Silicone Slow Cure Silicone Rubber For Decorative Plaster/Gypsum Celling Molding:
1.high quality similar to global big brand
2.18 months shelf life
3.50-1000 duplication time decided by product sizes
4.silicone non toxic, environment friendly
5.fast delivery within 4-6 days
6.shipment by air or by sea is available
7.24h after sales service
8.professional R&D team
Liquid Silicone Slow Cure Silicone Rubber For Decorative Plaster/Gypsum Celling Molding:
1. Q: There are many unqualified products in the market, how can you make sure your quality control?
A: We have passed ISO:9001 certification. Eeah of the goods would be checked several times strictly before shipping, and we are glad to accept the Third- party inspection company to quality check. And we will full refund in case of any bad quality.
2. Q: How about your production capacity, and how can you make sure my goods would be delivery on time?
A: We have 10 production lines, three quality inspection teams, and strong R&D team who have worked for more than10 years. The delay rate in the last years has been less than 0.3%.
3. Q: Do you offer OEM service?
A: OEM accept and we offer confidentiality agreement "business secret contract" for your design safe.
4. Q: Can I place a small order to test the quality?
A: Yes sure ,small order are also welcomed.
5. Q: Can I visit your factory?
A: Sure, welcome to visit our factory.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}