| Customization: | Available |
|---|---|
| Material: | Organic Silicone |
| Application: | Industrial, Agricultural, Mold Making |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Platinum cure silicone technical data
| Typical general characteristics |
Inspection Method |
Model code | ||||||||
|
Product data (catalyzed A+B) |
OTT-J8 series | |||||||||
| Hardness | Shore A | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 50 |
| Mix ratio | A:B | 1:1/10:1 | ||||||||
| Color | / | Translucent | ||||||||
| Pot life | 25ºC(77F) | 20-40 mins | ||||||||
| Curing time | 25ºC(77F) | 3-5 hours | ||||||||
| Viscosity | mPa.s | 1500 | 3000 | 4000 | 4500 | 5000 | 6000 | 7000 | 8000 | 12000 |
| Tear strength | KN/m | 12 | 15 | 18 | 24 | 22 | 21 | 22 | 18 | 12 |
| Tensile strength | MPa | 2.2 | 4.2 | 5.2 | 5.2 | 6.2 | 6.5 | 7.2 | 7.8 | 7.0 |
| Elongation | % | 500 | 450 | 450 | 500 | 500 | 450 | 450 | 400 | 400 |
| Shrinkage | % | 0.1 | ||||||||
1. What's silicone products you are making?
--liquid silicone, silicone rubber, silicone oil; Due to different silicone molds, our silicone has different viscosity, and cause different hardness, density to meet the requests from client.
2. Do you offer free sample to client?
--Yes, we can provide the sample for test.
3. How about the quality control in your factory?
--We have professional QC team to control the quality during production. Goods will be 100% inspected before shipment.
4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.
5. How to get good silicone mould to use longer time?
--The best way is:
#A, Please choose the right liquid silicone according to your products.
#B, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use.
#C, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.
6. Why silicone rubber add curing agent after mixing a lot of bubbles?
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.
Guangzhou OTT New Materials Co., Ltd. is a leading professional manufacturer of RTV liquid silicone in China. We are a science and technology manufacturer, professionally focus on R&D for liquid RTV silicone, and provide a serial services of silicone such as molding, insoles, sexy dolls, electronics, relative silicone materials and latest developed products, etc
If you have any questions, please do not hesitate to contact me.
Ms. Paddi
){kind=link}