Clear Addtion Cure Silicone Silicon Silikon Silicona Rubber/Liquid Rubber for Moldmaking

• Raw Material: Natural Rubber
• Material: Silicone Rubber
• Appearance: Liquid Silicone
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: OTT-J820
• Form: Liquid Rubber
• Mixing Ratio: 100:3, 100:2, 100:5
• Working Time/Pot Life: 30~50min
• Curing Time: 3~4h
• Shelf Llife: 18 Months
• Transport Package: Plywood Pallet
• Specification: 5kg, 20kg, 25kg, 200kg, 1000kg drum
• Trademark: OTT
• Origin: China
• HS Code: 39100000
• Production Capacity: 8000kg/Day
• Package Size: 21.00cm * 11.00cm * 14.00cm
• Package Gross Weight: 1.500kg

Product Description

Product Description

Clear Addtion Cure Silicone Silicon Silikon Silicona Rubber/Liquid Rubber for Moldmaking

Platinum-cured molding silicone is a two-part-kind liquid silicone, which belongs to food-grade

silicone, can be cured at room temperature, and mainly used for mold making of food-grade molds,

jewelry casting, tire molding, rapid prototyping, vacuum foaming, etc. It also suits any

condensation silicone's application for molding. With appropriate hardness, good tensile and tear

strength, and excellent resistance to deformation, finished silicone molds have not only a durable

life but also good performance.

Product Parameters

Clear Addtion Cure Silicone Silicon Silikon Silicona Rubber/Liquid Rubber for Moldmaking

 

Addition cured Silicone (Food grade)
Item	Mixing Ratio	Color	Hardness(shore A)	Viscosity (mPa.s)	Working Time     (25ºC)	Curing Time (25ºC)	Tear-Strength (kN/m)	Tensile- Strength (Mpa)	Elongation (%)	Shrinkage(%)
OTT-J805	1:1/10:1	translucent	5±2	1500±500	20-40mins	3-5h	≥10	≥2.0	≥450	≤0.1
OTT-J810	1:1	translucent	10±2	3000±2000	20-40mins	3-5h	≥15	≥4.2	≥450	≤0.1
OTT-J815	1:1	translucent	15±2	4000±2000	20-40mins	3-5h	≥15	≥5.0	≥400	≤0.1
OTT-J820	1:1	translucent	20±2	4500±2000	20-40mins	3-5h	≥24	≥5.2	≥500	≤0.1
OTT-J825	1:1	Translucent	25±2	5000±2000	20-40mins	3-5h	≥22	≥6.2	≥500	≤0.1
OTT-J830	1:1	translucent	30±2	6000±2000	20-40mins	3-5h	≥20	≥6.5	≥400	≤0.1
OTT-J835	1:1/10:1	translucent	35±2	7000±2000	20-40mins	3-5h	≥18	≥7.0	≥400	≤0.1
OTT-J840	1:1	translucent	40±2	8000±3000	20-40mins	3-5h	≥15	≥7.5	≥400	≤0.1
OTT-J850	1:1/10:1	translucent	50±2	12000±3000	20-40mins	3-5h	≥12	≥7.0	≥350	≤0.1

 

Packaging & Shipping

Clear Addtion Cure Silicone Silicon Silikon Silicona Rubber/Liquid Rubber for Moldmaking

Packing: 1kg/bottle, 5kg/tin, 20kg/25kg/200kg per drum

Shipping: by air & by sea

Delivery time: within 3-5 days after your payment confirmed in our bank

Features

Clear Addtion Cure Silicone Silicon Silikon Silicona Rubber/Liquid Rubber for Moldmaking

Amazing fluidity and easy to operate

Platinum-based, food-grade silicone (environmental friendly, odorless and non-toxic)

Delicate design available

1:1 Mixing ratio for easy mixing

Easy de-molding

Excellent tension and tear strength

High performance in duplication

Shrinkage is almost zero (below 0.1%)

Excellent resistance to weather, temperature, aging, acid and aging-proofing.

High resistance to high temperature and aging(resist -60°C to 250°C)

 

Operation Methods

Clear Addtion Cure Silicone Silicon Silikon Silicona Rubber/Liquid Rubber for Moldmaking

1. Stir part A (100g) and part B (100g) with 1:1 mixing ratio evenly. Then get the mixture for

vacuum-pumping. (If there is no vacuum machine, you can just pour the mixture slowly from the

corner so that less bubbles caused)

2. Enclose the products (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent (detergent or soap water) on your

products.

4. Pour the mixed silicone into the model frame.

5. After about 3 to 5 hours, when the silicone is cured, remove the original model, and then you

get a finished addition cured silicone mold.

 

FAQ

 

1. What's silicone products you are making?
--liquid silicone, silicone rubber, silicone oil; Due to different silicone molds, our silicone has different viscosity, and cause different hardness, density to meet the requests from client.  

2. Do you offer free sample to client?
--Yes, we can provide the sample for test.  

3. How about the quality control in your factory?
--We have professional QC team to control the quality during production. Goods will be 100% inspected before shipment.  

4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.  

5. How to get good silicone mould to use longer time?
--The best way is:   #A, Please choose the right liquid silicone according to your products.   #B, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use.   #C, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.  

6. Why silicone rubber add curing agent after mixing a lot of bubbles?  
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.

Company Profile