RTV2 Rubber Skin Touch Safe Liquid Silicone for Sex Toy Doll Body

• Material: Organic Silicone
• Application: Medical, Industrial, Agricultural
• Certification: ISO, FDA
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: OTT-R210
• Shelf Life: 18 Months
• Shipping Term: Fob/CNF/CIF/EXW/DDU
• Mixing Ratio: 1:1
• Shrinkage: ≤0.1%
• Color: Skin, Adjustable
• Pot Life: 20~40 Mins
• Curing Time: 3~5h
• Hardness: 0~35 Shore a
• Transport Package: Plywood Pallet
• Specification: 1kg, 5kg, 20kg, 25kg, 200kg, 1Ton
• Trademark: OTT
• Origin: Guangzhou, China
• HS Code: 3910000000
• Production Capacity: 8000kg/Day
• Package Size: 21.00cm * 11.00cm * 14.00cm
• Package Gross Weight: 1.500kg

Product Description

Product Description

RTV2 Liquid Silicone Rubber Skin Touch Safe Silicone for Sex Toy silicone doll body Making mainly applys to making sex toys , bra, mask ect, and also can be make nipples, glass, Artificial face, ears, hands made by liquid silicone and other kinds of molds. 

Detailed Photos

RTV2 Liquid Silicone Rubber Skin Touch Safe Silicone for Sex Toy silicone doll body Making
The color can be adjusted according to your requirement.

Application Photo

RTV2 Liquid Silicone Rubber Skin Touch Safe Silicone for Sex Toy silicone doll body Making

 

Product Parameters

RTV2 Liquid Silicone Rubber Skin Touch Safe Silicone for Sex Toy silicone doll body Making

Item	Mixing Ratio	Color	Hardness(shore A)	Viscosity (mPa.s)	Working Time     (25ºC)	Curing Time (25ºC)	Tear-Strength (kN/m)	Tensile- Strength (Mpa)	Elongation (%)	Shrinkage(%)
OTT-R200	1:1	translucent	0	1500±800	20-40mins	3-5h	≥3	≥1.5	≥400	≤0.1
OTT-R205	1:1	translucent	5±2	2000±1000	20-40mins	3-5h	≥10	≥2.0	≥400	≤0.1
OTT-R210	1:1	translucent	10±2	3000±1000	20-40mins	3-5h	≥13	≥3.0	≥400	≤0.1
OTT-R215	1:1	translucent	15±2	4000±1000	20-40mins	3-5h	≥15	≥4.0	≥400	≤0.1
OTT-R220	1:1	translucent	20±2	5000±1500	20-40mins	3-5h	≥20	≥5.0	≥450	≤0.1
OTT-R520	1:1	translucent	20±2	20000±5000	5-10mins	0.5-1h	≥16	≥5.4	≥500	≤0.1
OTT-R525	1:1	translucent	25±2	25000±5000	5-10mins	0.5-1h	≥15	≥5.0	≥400	≤0.1
OTT-R530	1:1	translucent	30±2	25000±5000	5-10mins	0.5-1h	≥15	≥5.5	≥400	≤0.1
OTT-R535	1:1	translucent	35±2	25000±5000	5-10mins	0.5-1h	≥15	≥6.0	≥400	≤0.1

Operation Method:
1.Stir part A 100g and part B 100g with 1:1 mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuum machine, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates

3. Clean your products and brush a layer of release agent (detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame. After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold.

Note: the time for vacuum-pumping should be less than 3-5mins, otherwise, once the silicone rubber has cross-link reaction during

Packaging & Shipping

Packing: 20kg/25kg/200 kg per drum

Shipping: by air & by sea

Delivery time: within 3-5 days after your payment confirmed in our bank

 

Operation Methods

1.Stir part A 100g and part B 100g with 1:1 mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuum machine, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates

3. Clean your products and brush a layer of release agent (detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame. After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold.

Note: the time for vacuum-pumping should be less than 3-5mins, otherwise, once the silicone rubber has cross-link reaction during

FAQ

1. What's silicone products you are making?
--liquid silicone, silicone rubber, silicone oil; Due to different silicone molds, our silicone has different viscosity, and cause different hardness, density to meet the requests from client.  

2. Do you offer free sample to client?
--Yes, we can provide the sample for test.  

3. How about the quality control in your factory?
--We have professional QC team to control the quality during production. Goods will be 100% inspected before shipment.  

4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.  

5. How to get good silicone mould to use longer time?
--The best way is:   #A, Please choose the right liquid silicone according to your products.   #B, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use.   #C, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.  

6. Why silicone rubber add curing agent after mixing a lot of bubbles?  
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.