W623 Similar Liquid Silicone for Printing Pads Making Rubber Silicon

Product Description

W623 Similar Liquid Silicone for Printing Pads Making Rubber Silicon

Product Description

W623 Similar Liquid Silicone for Printing Pads Making Rubber Silicon:

RTV-2 room temperature silicone rubber for elastic silicone rubber pad /printing pad silicone is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers. Pad printing silicone rubber as a carrier which transfers patterns on the steel plate to the toys products surface.

Product Parameters

W623 Similar Liquid Silicone for Printing Pads Making Rubber Silicon:

Characteristics:

1.Fantastic printing effects
2.Without any impurity
3.Friction resistance
4.Perfect resilience
5.Optically clear
6.heat-conducting.
7.High resistance to high temperature and aging(resist -60 to 250°C)
 

Typical general characteristics	Inspection Method	Value
Product data (Catalyzed A+B)	OTT-Y235
Mix Ratio	A:B	9:1
Color		Red/White
Pot life	25 °C (77F)	20-40 mins
Demold time	25 °C (77F)	3-5 hours
Hardness	Shore A	35±2
Viscosity	mPa·s	12000±2000
Tear-Strength	KN/m	≥20
Tensile -Strength	MPa	≥6.0
Elongation	%	≥400
Shrinkage	%	≤0.1

Instructions

W623 Similar Liquid Silicone for Printing Pads Making Rubber Silicon:

RTV-2 room temperature silicone rubber for elastic silicone rubber pad /printing pad silicone is two-component silicon, part A is the liquid silicon rubber, part B is the catalyst. The usual mixing ratio for silicon rubber and catalyst is 9:1, eg. We take 900grams of liquid silicon rubber, then we add 100 grams catalyst, mix then evenly and pour it to your mold. Then after 2-4 hours, you will obtain a printing pad.

The reasons why the silicone pad has a short service life are listed as follows:

 

(1)The problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags.

 

(2)The short service life of the silicone pad has a close relationship with the adding amount of silicone oil. The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy aging of the silicone pad.

 

(3)All the users should know the properties of pad printing silicone rubber. The service life of the silicone pad has close relationship with the size of the printed patterns. For example, if a big pattern to be printed, a big silicone pad is required; if a small pattern to be printed, a small silicone pad (the silicone pad has to be adjusted according to the size of the patterns, and the proportion between the size of the silicone pad and the pattern is 3:1.)

 

Why RTV-2 room temperature silicone rubber for elastic silicone rubber pad /printing pad silicone?

(1)If the silicon pad is too hard while the pattern is very delicate or small, the printing patterns will be incomplete or not very clear, for in that way the silicon pad could not adsorb the printing ink from the steel plate well. If your pattern is very delicate or small, please use soft silicon pad for pad printing.

(2)If the percentage of water in the ink is very high, the printing pattern also will be incomplete, and spot may appeared. For this situation, please clean your ink box, or change the printing ink or Tianna water. 

Company Profile

W623 Similar Liquid Silicone for Printing Pads Making Rubber Silicon:

OTT New Material Co., Ltd. is located in Guangzhou, Guangdong. We are a leading professional manufacturer of silicone material with integrating R&D, production and sales. Our customers are from all over the world. If you are interested in our products, please feel free to contact us for further information.

Our Advantages

W623 Similar Liquid Silicone for Printing Pads Making Rubber Silicon:

1.high quality similar to global big brand
2.18 months shelf life
3.50-1000 duplication time decided by product sizes
4.silicone non toxic, environment friendly
5.fast delivery within 4-6 days
6.shipment by air or by sea is available
7.24h after sales service 
8.professional R&D team

Packaging & Shipping

W623 Similar Liquid Silicone for Printing Pads Making Rubber Silicon:

Packing : 20KG, 25KG, 200 KG per drum 
Shipping : by air & by sea 
Delivery time: within 4-6 days after your payment confirmed in our bank 
Storage: Storage in cool, dry places. 
Shelf life: 18 months with the original unopened package

FAQ

W623 Similar Liquid Silicone for Printing Pads Making Rubber Silicon:

1. Do you offer free sample to client?

--Yes, we can provide the sample for test.  

 

2. How to remove the bubbles during my mould making?

--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.

 

3. How to get good silicone mould to use longer time?

--The best way is:   

#a, Please choose the right liquid silicone according to your products.   

#b, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use.

#c, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.  

 

4. Why silicone rubber add curing agent after mixing a lot of bubbles?  

--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.

Contact

If you are interested in our products,

please contact us and we will reply to you within 12 hours!

  gza(#)ottsilicone(#)com, #replace, at, dot

Browse more products of interest.