| Raw Material: | Synthetic Rubber |
|---|---|
| Material: | Silicone Rubber |
| Appearance: | Liquid |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier rtv2 silicone addition cure molding rubber is general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add Part A and Part B the same weight at room temperature, the silicone rubber is still operational within 20 to 40 minutes, and in 3-5 hours, an elastic silicon mold will be obtained.
Specification:
| Item | Mixing Ratio | Color | Hardness (Shore A) | Viscosity (mPa·s) | Working Time (25ºC) |
Curing Time (25ºC) | Tear-Strength (kN/m) | Tensile-Strength (Mpa) | Elogation (%) | Shrinkage (%) |
| OTT-J810 | 1:1/10:1 | translucent | 10±2 | 5000±2000 | 20-40mins | 3-5h | ≥13 | ≥4.0 | ≥400 | ≤0.1 |
| OTT-J815 | 1:1/10:1 | translucent | 15±2 | 5000±2000 | 20-40mins | 3-5h | ≥15 | ≥5.0 | ≥400 | ≤0.1 |
| OTT-J820 | 1:1/10:1 | translucent | 20±2 | 6000±2000 | 20-40mins | 3-5h | ≥23 | ≥5.0 | ≥450 | ≤0.1 |
| OTT-J825 | 1:1/10:1 | translucent | 25±2 | 7000±2000 | 20-40mins | 3-5h | ≥22 | ≥6.0 | ≥450 | ≤0.1 |
| OTT-J830 | 1:1/10:1 | translucent | 30±2 | 8000±2000 | 20-40mins | 3-5h | ≥20 | ≥6.5 | ≥400 | ≤0.1 |
| OTT-J835 | 1:1/10:1 | translucent | 35±2 | 8000±2000 | 20-40mins | 3-5h | ≥18 | ≥6.5 | ≥400 | ≤0.1 |
| OTT-J840 | 1:1/10:1 | translucent | 40±2 | 9000±3000 | 20-40mins | 3-5h | ≥15 | ≥6.5 | ≥350 | ≤0.1 |
| OTT-J850 | 1:1/10:1 | translucent | 50±2 | 13000±3000 | 20-40mins | 3-5h | ≥12 | ≥6.0 | ≥350 | ≤0.1 |
1.Enclose the product (the original model) with four plastic plates or wooden plates
2.Clean your products and brush a layer of release agent (detergent or soap water) on your product.
3.Stir part A 100g and part B 100g with 1:1 mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuum machine, you can just pour the mixture slowly from the corner so that less bubbles caused)
4.Pour the mixture with correct mixing ratio into the model frame. After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold.
Packing : 20KG, 25KG, 200 KG per drum
Shipping : by air & by sea
Delivery time: within 4-6 days after your payment confirmed in our bank
Storage: Storage in cool, dry places.
Shelf life: 18 months with the original unopened package
1.high quality similar to global big brand
2.18 months shelf life
3.50-1000 duplication time decided by product sizes
4.silicone non toxic, environment friendly
5.fast delivery within 4-6 days
6.shipment by air or by sea is available
7.24h after sales service
8.professional R&D team
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}