RTV2 Food Safe Liquid Mould Mold Making Silicone Rubber for Candy Cake Fodant Sugar Silicone Mold

• Customization: Available
• Material: Organic Silicone
• Application: Industrial
• Model NO.: OTT-J820
• Certification: ISO, FDA
• Compay Type: Manufacturer
• Mixing Ratio: 1:1, 10:1
• Working Time/Pot Life: 30~50min
• Curing Time: 3~4h
• Hardness: 0~50shore a
• Transport Package: 20kg/Drum, 25kg/Drum or 200kg/Drum
• Specification: Liquid Silicone
• Trademark: OTT
• Origin: China
• HS Code: 39100000
• Production Capacity: 8000kg/Day
• Package Size: 21.00cm * 11.00cm * 14.00cm
• Package Gross Weight: 1.500kg

Product Description

Product Description

RTV2 Food Safe Liquid Mould Mold Making Silicone Rubber for Candy Cake Fodant Sugar Silicone Mold

rtv2 silicone addition cure molding rubber is general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add Part A and Part B the same weight at  room temperature, the silicone rubber is still operational within 20 to 40 minutes, and in 3-5 hours, an elastic silicon mold will be obtained.
 

• candle, soap,food mold, cake mold, chocolate mold
• molds of concrete, stone, artificial stone wall
• GRC, gypsum decoration, plaster ornaments, cement
• fiberglass products, polyester decoration, 
• unsaturated resin crafts, polyresin crafts, polyurethane, resin casting,
• bronze casting,wax, sculpture, staues
• Jewellery molding, jewelry casting
• vacuum casting, rapid prototype, urethane casting, vacuum bagging

Product Parameters

RTV2 Food Safe Liquid Mould Mold Making Silicone Rubber for Candy Cake Fodant Sugar Silicone Mold

tem	Mixing Ratio	Color	Hardness (Shore A)	Viscosity (mPa·s)	Working Time (25ºC)	Curing Time (25ºC)	Tear-Strength (kN/m)	Tensile-Strength (Mpa)	Elogation (%)	Shrinkage (%)
OTT-J810	1:1/10:1	translucent	10±2	5000±2000	20-40mins	3-5h	≥13	≥4.0	≥400	≤0.1
OTT-J815	1:1/10:1	translucent	15±2	5000±2000	20-40mins	3-5h	≥15	≥5.0	≥400	≤0.1
OTT-J820	1:1/10:1	translucent	20±2	6000±2000	20-40mins	3-5h	≥23	≥5.0	≥450	≤0.1
OTT-J825	1:1/10:1	translucent	25±2	7000±2000	20-40mins	3-5h	≥22	≥6.0	≥450	≤0.1
OTT-J830	1:1/10:1	translucent	30±2	8000±2000	20-40mins	3-5h	≥20	≥6.5	≥400	≤0.1
OTT-J835	1:1/10:1	translucent	35±2	8000±2000	20-40mins	3-5h	≥18	≥6.5	≥400	≤0.1
OTT-J840	1:1/10:1	translucent	40±2	9000±3000	20-40mins	3-5h	≥15	≥6.5	≥350	≤0.1
OTT-J850	1:1/10:1	translucent	50±2	13000±3000	20-40mins	3-5h	≥12	≥6.0	≥350	≤0.1

How to use platinum cured silicone?

Step 1: prepare the original molds
Make your original molds perfect. fix it on a board. And fix the original mold on a board , then used four piece of board to enclose the original molds . 
Step 2: Take 100 G parts A platinum catalyst silicone and add 100G parts B silicone rubber and mix them evenly. 
*Notes: Mold making silicon rubber is a kind of flowing liquid ,it contains two parts. Part A is a kind of flowing white liquid and part B is the curing agent or catalyst .Pls follow the step strictly:
1.Weigh the two part exactly by electronic weight. If not, for example add too much catalyst , the operation time will be too fast to operate ,which will cause inconvenience to operate . 
2.Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What's more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber. 
Step 3: Vacuum pumping(optional)
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available. 
Step 4: Pouring casting or Brush operation
*Notes:1. For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require low viscosity which will be easy to flow smoothly and easy to de-air . 
2.For delicate pattern products we suggest use brushing operation way, which can copy the pattern exactly. Brushable silicone require high viscosity which won't be easy to flow away and easy to brush. 
3. We sugges to set the silicone mold for another 12 hours after demould before you put it into a large production.
 

Certifications

RTV2 Food Safe Liquid Mould Mold Making Silicone Rubber for Candy Cake Fodant Sugar Silicone Mold

 

Packaging & Shipping

RTV2 Food Safe Liquid Mould Mold Making Silicone Rubber for Candy Cake Fodant Sugar Silicone Mold

Packing : 20KG, 25KG, 200 KG per drum 
Shipping : by air & by sea 
Delivery time: within 4-6 days after your payment confirmed in our bank 
Storage: Storage in cool, dry places. 
Shelf life: 18 months with the original unopened package

 

Our Advantages

1.high quality similar to global big brand
2.18 months shelf life
3.50-1000 duplication time decided by product sizes
4.silicone non toxic, environment friendly
5.fast delivery within 4-6 days
6.shipment by air or by sea is available
7.24h after sales service 
8.professional R&D team

Good Feedback from our Customer:

FAQ

1. What's silicone products you are making?
--liquid silicone, silicone rubber, silicone oil; Due to different silicone molds, our silicone has different viscosity, and cause different hardness, density to meet the requests from client.  

2. Do you offer free sample to client?
--Yes, we can provide the sample for test.  

3. How about the quality control in your factory?
--We have professional QC team to control the quality during production. Goods will be 100% inspected before shipment.  

4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.  

5. How to get good silicone mould to use longer time?
--The best way is:   #A, Please choose the right liquid silicone according to your products.   #B, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use.   #C, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.  

6. Why silicone rubber add curing agent after mixing a lot of bubbles?  
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.

 

Company Profile

Guangzhou OTT New Materials Co., Ltd. is a leading professional manufacturer of RTV liquid silicone in China. We are a science and technology manufacturer, professionally focus on R&D for liquid RTV silicone, and provide a serial services of silicone such as molding, insoles, sexy dolls, electronics, relative silicone materials and latest developed products, etc

Recommend Product