2024 Free Sample Liquid Silicone for LED Electronic Potting RTV-2 Silicone Rubber

• Customization: Available
• Material: Organic Silicone
• Application: Industrial
• Model NO.: OTT-D8220
• Certification: ISO, FDA, MSDS
• Color: White/Grey/Transparent
• Shelf Life: 12-18 Months
• Business Type: Factory Direct Sale
• Trade Term: EXW/CNF/CIF/Fob/DDU
• Shipment: by Sea, by Air
• MOQ: 200kg
• Sample: Available
• Lead Time: 7 Days After Payment
• Payment: Tt in Advance
• Hardness: 20 Shore a
• Transport Package: Plywood Pallet
• Specification: 5kg, 20kg, 25kg, 200kg, 1000kg pkg
• Trademark: OTT Silicone
• Origin: Guangzhou
• HS Code: 3910000000
• Production Capacity: 600000
• Package Size: 21.00cm * 11.00cm * 14.00cm
• Package Gross Weight: 1.500kg

Product Description

Liquid Two Parts Silicone Rubber for LED Electronic Potting Silicone

Product Description

Liquid Two Parts Silicone Rubber for LED Electronic Potting Silicone:

Silicone rubber are designed to be applied in potting general electronic components, power module and and printed circuit board, electrical/electronic devices and components from harsh environments that can include high humidity and moisture, temperature extremes, mildew and dirt. 

Typical general characteristics	Inspection Method	Model code
Product data  (catalyzed A+B)		D83	D82
Hardness	Shore A	15/20	25/30/35/40/45/50
Mix ratio	A:B	10:1	1:1
Color	/	Transparent	Gray or white
Pot life	25ºC (77F)	60-120 mins	60-120 mins
Curing time	25ºC (77F)	6-12 hrs	6-12 hrs
Viscosity	mPa.s	1500	2000
Thermal conductivity	W/(m.k)	0.2-0.3	0.6-1.0
Volume resistivity	(Ω.m)	10^14	10^13-14
Flame-retardant level	/	V-2	V-1
Shrinkage	%	≤0.2	≤0.1

*Addition cure silicone: D82 series hardness from 25 to 50 shore A
*Tin cure silicone: D83 series hardness from 15 to 20 shore A

 

Gel Silicone
 

RTV-2 addition cure silicone gel is viscous, transparent liquid with low viscosity, and belongs to two-component addition cure silicone rubber. After mixing the part A and part B at a mix ratio of 1:1, it cures at room temperature or by heating and becomes gel-like elastomer. This silicone rubber is used for the surface of poly-carbonate (PC), PP, ABS, PVC and metal, etc. The curing reaction does not generate heat or any by-products.

 

Typical general characteristics	Inspection Method	Model code
Product data  (catalyzed A+B)		DN303	DN308
Hardness	Shore A	/	/
Mix ratio	A:B	1:1	1:1
Color	/	Transparent	Transparent
Pot life	25ºC (77F)	60-120 mins	60-120 mins
Curing time	25ºC (77F)	8-12 hrs	8-12 hrs
Viscosity	mPa.s	500	500
Thermal conductivity	W/(m.k)	0.2-0.3	0.2-0.3
Volume resistivity	(Ω.m)	10^13-14	10^13-14
Flame-retardant level	/	V-2	V-2
Shrinkage	%	≤0.2	≤0.1

Features

Temperature resistance ranges from -60ºC~200ºC;

Excellent electric property;

Excellent deep curing performance and certain adhesiveness;

Water and dust proofing ;

Eco friendly;

Low adhesion. Suitable for potting into devices with low-adhesive requirement;
 

We have white color, translucent color, transparent color and other colors for your choose

Installation Instructions

Liquid Two Parts Silicone Rubber for LED Electronic Potting Silicone:

1.Measuring & mixing

Before you begin, accurately weigh Part A and Part B. Put Parts A and B into mixing container, mix thoroughly couple of minutes to make sure that you scrape the sides and bottom of the mixing container several times. After mixing parts A and B, vacuum degassing is recommended to eliminate any entrapped air in mixture. Vacuum time should be around 5~8 minutes.

2.De-airing

Can use natural deaerating and vacuum method.
Natural deaerating: let the mixed glue rest for 20- 30 minutes;
The vacuum deaerating: take 5-10 minutes at vacuum degree 0.09- 0.1 MPa.

3.Pouring performance

Pouring-Before potting, the surface of parts and the mixing container keep clean and dry.)
Encapsulate the mixture into the products to finish the pouring operation.

4.Curing / Post Curing

Vulcanizing:Put the sealed product in room temperature and let it cure in natural condition. It needs 6-8hrs for complete curing in room temperature. If you need to speed up, you can accelerate the curing process in higher temperature. Generally, it would take 60mins to cure completely under 60ºC; 30mins under 80ºC and 20mins at 120ºC.

Our Advantages

Liquid Two Parts Silicone Rubber for LED Electronic Potting Silicone:

1. Specialized in rtv2 silicone for 15 years

2. Advanced production and R&D equipment, we have two separated production line and equipment 

3. Professional R&D team

4. Experienced QC team 

5. Professional sales team, fastest response 24 hours full-time service

6. On time delivery, monthly production reaches 200 tons

7. Professional technical support, both in rtv2 silicone and mould making technology

8. Face-to face business talking. We would fly to talk with you only if you have the willing of long term business cooperation.

9. Factory visiting anytime

10. All kinds of certificates, such as MSDS, , RoHS etc.Highest performance cost ratio - best quality and reasonable price.

11. Experienced purchasing team to guarantee sufficient raw material

12. DIY service: various size of packages and customized labels

13. Sharing latest industry information

14.Marketing assistance to help you expand your local business

Packaging & Shipping

Liquid Two Parts Silicone Rubber for LED Electronic Potting Silicone:

Packing : 1KG, 5KG, 20KG, 25KG, 200 KG, 1000KG per drum
Shipping : by air & by sea
Delivery time: within 5-7 days after your payment confirmed in our bank
Storage: Storage in cool, dry places.