| Material: | Organic Silicone |
|---|---|
| Application: | Industrial, DIY Art |
| Certification: | ISO, FDA |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
Liquid Molding Silicone for Candle Soap RTV 2 Silicone for Plaster Decorative Molding
Liquid Molding Silicone for Candle Soap RTV 2 Silicone for Plaster Decorative Molding:
What we have and what we produce:
1. Mold making silicone rubber from 0shoreA hardness to 50shoreA hardness, room temperature cured and Food grade (GRC, Resin, stone, plaster, gypsum, soap, candle, cake, chocolate moulding...)
2. Medical grade insole silicone and life casting body silicone from 0shoreA to 40shoreA hardnss (silicone insole, adult doll, silicone toys, artificial limbs...)
3. High transparent silicone 10shoreA to 40shoreA hardness...
4. Pad printing silicone with different hardness after mixing silicone oil, like similar with W623 red color...
5. Electonic potting silicone with different color and different hardness for potting...
6. Silicone resin powder, light diffuser agent for LED light diffuser, light diffuser masterbatch, PMMA sheet, Pc sheet, Optical films...
Liquid Molding Silicone for Candle Soap RTV 2 Silicone for Plaster Decorative Molding:
Tin cure silicone
| Typical general characteristics |
Inspection Method |
Model code | |||||||
|
Product data (catalyzed A+B) |
OTT-S8 series | ||||||||
| Hardness | Shore A | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 |
| Mix ratio | A:B | 100:3 | |||||||
| Color | / | white | |||||||
| Pot life | 25ºC(77F) | 20-40 mins | |||||||
| Curing time | 25ºC(77F) | 3-5 hours | |||||||
| Viscosity | mPa.s | 5000 | 8000 | 11000 | 11000 | 16000 | 21000 | 18000 | 12000 |
| Tear strength | KN/m | 10 | 16 | 24 | 23 | 26 | 26 | 24 | 22 |
| Tensile strength | MPa | 1.6 | 3.2 | 3.5 | 4.2 | 4.5 | 4.5 | 4.2 | 4.0 |
| Elongation | % | 500 | 600 | 580 | 500 | 500 | 450 | 350 | 280 |
| Shrinkage | % | 0.2 | |||||||
Platinum cure silicone
| Typical general characteristics |
Inspection Method |
Model code | ||||||||
|
Product data (catalyzed A+B) |
OTT-J8 series | |||||||||
| Hardness | Shore A | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 50 |
| Mix ratio | A:B | 1:1/10:1 | ||||||||
| Color | / | Translucent | ||||||||
| Pot life | 25ºC(77F) | 20-40 mins | ||||||||
| Curing time | 25ºC(77F) | 3-5 hours | ||||||||
| Viscosity | mPa.s | 1500 | 3000 | 4000 | 4500 | 5000 | 6000 | 7000 | 8000 | 12000 |
| Tear strength | KN/m | 12 | 15 | 18 | 24 | 22 | 21 | 22 | 18 | 12 |
| Tensile strength | MPa | 2.2 | 4.2 | 5.2 | 5.2 | 6.2 | 6.5 | 7.2 | 7.8 | 7.0 |
| Elongation | % | 500 | 450 | 450 | 500 | 500 | 450 | 450 | 400 | 400 |
| Shrinkage | % | 0.1 | ||||||||
Features:
1.Almost nil shrinkage
2.Good fluidity, operability and excellent operation
3.Good resistance to weather, temperature, aging, acid
4.Excellent tear strenght, comfortable duplcation times
5.High chemical resistance to aggressive components of some types of resins
6.Food grade silicone(environmental, odorless and nontoxic
7.High resistance to high temperature and aging(resist -60 to 200ºC)
Liquid Molding Silicone for Candle Soap RTV 2 Silicone for Plaster Decorative Molding:
Liquid Molding Silicone for Candle Soap RTV 2 Silicone for Plaster Decorative Molding:
Step 1: prepare the original molds
Make your original molds perfect. fix it on a board. And fix the original mold on a board , then used four piece of board to enclose the original molds .
Step 2: Take 100 G parts A and add 3G parts B and mix them evenly.
*Notes: Mold making silicon rubber is a kind of flowing liquid ,it contains two parts. Part A is a kind of flowing white liquid and part B is the curing agent or catalyst .Pls follow the step strictly:
1.Weigh the two part exactly by electronic weight. If not, for example add too much catalyst , the operation time will be too fast to operate ,which will cause inconvenience to operate .
2.Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What's more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
Step 3: Vacuum pumping(optional)
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step 4: Pouring casting or Brush operation
*Notes:1. For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require low viscosity which will be easy to flow smoothly and easy to de-air .
2.For delicate pattern products we suggest use brushing operation way, which can copy the pattern exactly. Brushable silicone require high viscosity which won't be easy to flow away and easy to brush.
3. We sugges to set the silicone mold for another 12 hours after demould before you put it into a large production.
Liquid Molding Silicone for Candle Soap RTV 2 Silicone for Plaster Decorative Molding:
1. Specialized in rtv2 silicone for 15 years
2. Advanced production and R&D equipment, we have two separated production line and equipment
3. Professional R&D team and experienced QC team
4. Professional sales team, fastest response in 24 hours
5. On time delivery, monthly production reaches 200 tons
6. Professional technical support, both in rtv2 silicone and mould making technology
7. Factory visiting anytime
8. All kinds of certificates, such as MSDS,RoHS etc.
9. OEM service: various size of packages and customized labels
Liquid Molding Silicone for Candle Soap RTV 2 Silicone for Plaster Decorative Molding:
1. Do you offer free sample to client?
--Yes, we can provide the sample for test.
2. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.
3. How to get good silicone mould to use longer time?
--The best way is:
#a, Please choose the right liquid silicone according to your products.
#b, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use.
#c, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.
4. Why silicone rubber add curing agent after mixing a lot of bubbles?
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.
Liquid Molding Silicone for Candle Soap RTV 2 Silicone for Plaster Decorative Molding:
Packing : 1KG, 5KG, 20KG, 25KG, 200 KG, 1000KG per drum
Shipping : by air & by sea
Delivery time: within 4-7 days after your payment confirmed in our bank
Storage: Storage in cool, dry places.
Shelf life: 18 months with the original unopened package
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}